常德附近有没有服务

 Qingdao Dadong Intelligent Equipment Technology Co., Ltd

Main products CNC turret punch, all electric servo turret punch, CNC bending machine
CNC laser cutting machine, CNC flexible production unit and other intelligent sheet metal processing equipment.

eighteen billion six hundred and sixty-nine million eight hundred and eighty-two thousand two hundred and sixty-three

Company news

CNC press clamp

2020-04-25 11:09 ( )Browse times

After long-term use, the upper clamp body and the left and right guide arms of the pneumatic clamp can make the upper clamp body swing within 0.05mm after being forced to the left and right. At this time, the stress of the front and back swing body is also controlled by the swing body in the T-shaped direction
After long-term use, the upper clamp body and the left and right guide arms of the pneumatic clamp can make the upper clamp body swing within 0.05mm after being forced to the left and right.
 
When the upper clamp body also has a large deflection after the force in the front and rear directions, the clearance should be reduced by repairing the T-shaped shaft, and the deflection should be controlled within 0.03-0.05mm.
 
Because the pneumatic clamp of CNC punch is designed based on the floating principle, the upper clamp body should be able to float up and down after the clearance adjustment.  
 
If the toothed plate in the clamp is loose, the connecting screw of the toothed plate shall be tightened. If the tooth surface of the toothed plate in the pneumatic clamp of the CNC punch is ground flat, the tooth plate should be replaced.
 Clamp

Recommended news

contact us

 Direct communication via wechat

24-hour telephone service eighteen billion six hundred and sixty-nine million eight hundred and eighty-two thousand two hundred and sixty-three

——Direct communication via wechat